 |
 |
ELECTROCHLORINATION
FOR WATER TREATMENT |
 |
|
|
|
| Pristine
Water Offers the following Electro Chlorination for Disinfection of
Drinking water, Waste Water Treatment, Odor elimination, Cooling Water,
Disinfection of Water used in off-shore facilities and on ships.
|
|
 Batch
Process Electro Chlorination |
|
 |
|
 |
| Electro Chlorinator |
Electrolyzer |
Chlorinator |
Electrochlorinator |
| Model No. |
Type |
Capacities |
Components |
| PBP |
Fixed Cell |
100, 200, 400 grams/hour |
Electrolizer, Power Supply,
Tank & Cable |
| PBP-DIP |
Portable Cell |
10, 25, 50, 100 grams/hr |
Electrolizer with Housing
in Power Supply and cable |
|
|
|
|
| Model
PBP are batch process Electro chlorinator systems. Electrochlorinators are very simple to operate and
to maintain. In eight hours the Electro chlorinator system produces required quantity
of active chlorine. Water is filled in the brine tank and required
salt is dissolved. The portable Electrolyzer(in model PBP. DIP) is
placed inside a tank. In our PBP model Electrochlorinator the Electrolyzer cell is fixed inside the reaction tank. The power supply is switched on. A special
Switch Mode type electronic constant output power supply unit can also be provided.
This unit does not get heated up and is lightweight unlike the linear
power supply. The power supply panel is provided with a timer that
is set at 8 hour or as required. The system stops after the preset
time and producing required quantity of sodium hypochlorite. An electronic
pump can be provided to dose the hypo. The Electrolyzer can be cleaned
easily by dipping it in a mild acid solution. |
|
|
|
|
| Electrolyzer: |
| The Electrolyzer is made
of Titanium and coated with noble metals like Platinum,
Ruthenium and Iridium, by a specialized process.
Model PBP has an electrolyzer, which is fixed to
a process tank, adequate for production of Sodium
Hypochlorite. The Electrolyzer is provided with
Teflon (PTFE) spacers, which is resistant to corrosion
by Hypochlorite. Copper cable of the right cross
section is provided to carry the required current,
without getting heated up. Periodic cleaning of
the Electrolyzer with a mild acid solution will
prolong the life of the Electrolyzer and improve
production of Sodium Hypochlorite. |
| Control Module |
An accurate and a high
quality transformer/rectifier are used to provide
the required low-voltage DC power for the Electrolyzer.
This is housed in a well ventilated enclosure.
The Control Module coverts the input voltage of
110/230 /440 V AC 50 Hz to the required DC voltage.
We offer the reliable and time-tested Linear Type
Power Supply along with voltmeter, ammeter and timer.
We also offer accurate, latest technology, Switch
Mode Power Supply (SMPS). It is light weight ( only
7 Kgs as compared to 70 Kgs. of the Linear Type
), does not generate heat and has constant output
even with fluctuating input. Control Module is provided
with a timer control, which will shut off the system
after the pre set time. |
| Process Tank |
| Process Tank is made of
Fiber Reinforced Plastic (FRP) using Vinyl Ester
resin that is not only resistant to Chlorine but
also capable of withstanding the heat generated
during the process of electrolysis of salt water.
The tank is gel coated with and has a smooth external
finish in a pleasing colour. |
|
|
|
| |
 |
 |
| SMPS Power supply for Electrochlorinator |
Linear for Electro Chlorinator Power
Supply |
| |
|
 |
 |
| Fixed Cell (Model
- PBP) for Electrochlorinators |
Portable Cell
Model - (PBP - Dip) for Electro chlorinators |
|
|
|
| Continuous
Production Electrochlorinators |
|
|
|
|
| Electrochlorinator |
Electrolyzer |
Chlorinator |
Electro Chlorinator |
| Model No. |
Type |
Capacities |
Component |
| PCP |
Fresh Water |
500 to 6000 grams /hr |
Shall be as per requirement |
| PSP |
Sea Water |
500 to 6000 gram/hr |
Shall be as per requirement |
|
|
|
|
Electrochlorinator for Continuous
Production With Fresh Water
Our Electrochlorinator Model PCP is a Continuous production system. Electro chlorinator contains
all the equipment required for continuous production of 0.6 to 0.8%
Sodium Hypochlorite. Fresh water flowing through a Rotameter into
the Electrolyzer chamber. Brine from Brine Tank is pumped through
a metering pump and is injected into the pipe carrying fresh water.
In the Electrolyzer chamber, the salt solution gets converted to Sodium
Hypochlorite and fills into storage tank. The entire process in the Electro chlorinator is automatic
with multiple interlock. Fresh water inlet line is provided with a
Solenoid Valve that opens when the process is switched on and closes
when the hypo storage tank is full. A temperature sensor is also provided
in the Electrolyzer, if the temperature of Sodium Hypochlorite produced,
exceeds the preset temperature limit, sodium hypochlorite generator switches itself off
giving a cooling off period for the Electrolyzer. Once the temperature
comes below the preset temperature, sodiumhypochloritegenerator automatically switches
on. This preserves the life of the Electrolyzer.
A level switch provided in the Hypochlorite storage tank does not
allow the production of Hypochlorite once the storage tank is full.
It automatically switches sodium hypochlorite generator on when the level in storage
tank is reduced. A metering pump is provided in the storage tank to
dose Sodium Hypochlorite into the process.
A cooling chamber is connected to the Electrolyzer to cool the Sodium
Hypochlorite produced. The cooling chamber has a titanium coil housed
in a FRP chamber and connected to cooling water. The storage tank
has an arrangement to vent out the Hydrogen produced during the generation
process with the help of a forced draft fan and vent pipe.
On prolonged use, Calcium And Magnesium salts deposit on the plates
of the Electrolyzer. To remove this deposit the cell has to be cleaned
periodically, if the feed water is hard, with mild acid solution.
An Acid cleaning system can be provided if required.
Electro Chlorinator for Continuous Production with Sea Water 
The working process of Sea Water Electrochlorinators are similar to
synthetic brine Electrochlorinator, except for the following:
- Sea water Electrochlorinators are not provided with salt saturation Tank and metering
pump for pumping concentrated brine.
- The design and size of the Electrolyzer cell are made to take
the high velocity of the sea water passing through it.
- The chlorine concentration in the Sodium Hypochlorite shall
be 0.2%.
|
|
|
